Technical Description of the Batch Defect Incident in the RL06 Loader Series

Dear RIPPA Customer

With regard to market feedback on the RL06 loader and the RB06 backhoe loader, involving issues such as bent and damaged frame connecting pins, RIPPA’s R&D Center has conducted thorough testing and analysis. The identified problems, their causes, and corresponding countermeasures are detailed below:

• Problem Description

During machine operation, the ear plate of the lower connecting pin between the front and rear frames fractured.

• Root Causes

The causes identified through testing and analysis of this issue are as follows:

(1) When the loader travels over slopes or performs lifting operations, significant vertical tensile forces and lateral shear forces are exerted on the central articulation pin of the frame. Tests revealed that the downward vertical force acts solely on the pin ear plate without being transmitted to the frame itself; under prolonged operation, the ear plate was repeatedly subjected to bending loads exceeding its ultimate strength, ultimately leading to fracture.

(2) During testing, only the traveling, steering, and tilting angles were validated, without verifying the long-term working strength of the structure, which led to this issue.

• Countermeasures

With regard to the above issues, our company will implement the following countermeasures:

Solution (1): Weld additional support lugs beneath the front frame and replace the pin with an extended pin passing through the upper and lower frame lugs, so that the load is transferred to the frame instead of being borne directly by the pin, thereby extending the service life of the pin.

Solution (2): Perform strength verification on the enhanced articulated configuration, followed by 100 hours of field testing with repeated lifting under load and travel over rugged, pothole-filled roads to simulate various working road conditions, ensuring that the strength of the pin structure meets the service requirements.

In accordance with the above countermeasures, we conducted spot-check tests on 10 units of this model in-plant, and all test results met the test standards.

To address the above issues, our company will initiate a recall of the affected vehicles and carry out maintenance and repair programs. For the vehicles involved, we will provide free services including replacement parts, repair work instructions, and repair videos.

The replacement parts details are as follows (per unit):

Recall Process：

1. Submit your VIN code for verification via https://recall.rippa.com/submit, or scan the QR code below to access the verification page.

2. Fill in your personal information in the recall section to facilitate parts dispatch to your designated shipping address. After submission, the parts will be shipped within 7 days.

3. If your vehicle is not covered by this recall batch, you can also contact us for any abnormal issues via the after-sales service ticket QR code below.

4. After completing the repair, upload the repair verification photos. Once the photos are reviewed and confirmed, the repair subsidy will be deposited into the designated account within 15 working days.                     

Recall Verification                     

After-sales Service Work Order

• الخاتمة

We sincerely apologize for the inconvenience caused by this issue. RIPPA will continue to follow up on the resolution progress to ensure the normal operation of your equipment.

Best regards!